The Painting of Peachtrees

The first step was to prime the whole thing black. I used some cheap mat black spray. It worked fine.

Once that dried, I used newspaper and masking tape to cover the interior and the fan. I used krylon mat grey and set the building on its side and sprayed lightly from the top of the building towards the bottom, to highlight the raised parts.

Before and after.

It dried quite quickly as there was very strong wind.

I then taped up the interior re-using the masking tape and newspaper. I used krylon rust red for the interior walls. Again I sprayed top-down to leave the texture details black.

I really like this colour.

Using some thin masking tape I marked out hazard stripes around the edge of each floor. Then I sprayed it mat white followed by yellow. It doesn't matter if it's messy as I can clean it up with black paint or weathering.

Currently about half way through this stage.

The black part of the floor will be sponge weathered with dark gray (adeptus battle grey). I used that colour on my deadzone and it looks awesome.